Tuesday, 27 October 2026

Lecture 2-1: Velocity Kinematics and the Jacobian

We studied how to derive angular velocities and linear velocity of a fixed and arbitrary axes, then found the relation of  end-effector linear and angular velocities with joint velocities.

We introduced the Jacobian to describe instantaneous transformation of joint velocities to the linear and angular velocities of the end-effector. To illustrate the method, we used examples of serial manipulators to learn how to describe the Jacobian of such robots.

Monday, 26 October 2026

Lab 2 - Review of Assignment 1 (Forward Kinematics) and Inverse Kinematics

The first assignment will be released this week, so we will use our lab time (2:30 - 5:20) to review Assignment 1 in the first part, and review the Inverse Kinematics with examples in the lecture notes and derive the inverse kinematics of AL5D robots

1. Review the Forward Kinematics of Serial Manipulators of Assignment 1

2. Find the inverse kinematics of AL5D manipulator

- You should review the lecture notes of Inverse Kinematics (Lecture 1-5) 

- Use knowledge learnt through examples in Lecture 1-5 to derive the inverse kinematics of the AL5D robot. 



Thursday, 8 October 2026

Module 1-5 Inverse Kinematics

We studied inverse kinematics of industrial manipulators. The key difference between the forward and inverse kinematics is that: there is always a unique solution for the forward kinematics while the inverse kinematics may or mayn't have a solution, therefore analytical closed-form solutions are ideal.

In a closed form solution, we solve the inverse kinematics in two parts: inverse position kinematics and inverse orientation kinematics. A number of examples were used to study how to solve the inverse kinematics.

We also studied the numerical method of how to find inverse kinematics of n-link manipulators.

Wednesday, 7 October 2026

Assignment 1 released!

Assignment 1 has been released. You can click HERE to find it. 

Remember to submit your assignment via email to me and Tuan by the deadline). 

You should pay attention to the notices in the assignment.

Tuesday, 6 October 2026

Lab 1: Forward Kinematics

Lab 1 is dedicated to review through the Forward Kinematics:

1. Review through 6 examples of Lecture 1-4 to ensure how to assign coordinates and identify parameters and variables accordingly.

2. Derive the homogeneous transformation matrices of the robot arm AL5D, then examine the DH parameters w.r.t the end-effector. Given a set of robot configuration (a.k.a DH parameters), find and verify the end-effector position and orientation.












Lecture 1-4: More examples of Forward Kinematics

We have studied a couple of examples of forward kinematics to get better understanding about how to use the DH convention to represent a kinematics of chained rigid bodies.


Friday, 2 October 2026

Lecture 1-3 Forward Kinematics

We have learnt how to utilize the homogeneous transformation matrices to represent forward kinematics of serial manipulator. DH convention was introduced and analyzed through examples of serial manipulator.
You should go through slides and look at more examples of how to use DH to describe forward kinematics of different robot kinematics.