Sunday, 15 November 2026

Mini-project (assignment 3) released

 Assignment 3 has been released. You can click HERE to find it.

The lab on November 17 at 2:30 p.m. in the Robotics lab (127) is designed to support this mini project. 


Remember to submit your assignment via email to Tuan and me by the deadline. 

You should pay attention to the notices in the assignment.

Tuesday, 10 November 2026

Lecture 2-4: Path planning and trajectory planning

Artificial potential field and probabilistic roadmaps methods were introduced and presented. We also studied how to derive potential force field for two-link planar manipulator.

Probabilistic roadmaps were also introduced as a method to avoid local minima of artificial potential field through randomization of waypoints.

A classical method of polynomial functions was described as a way of how to smoothen inter-connection of waypoints. Third and firth polynomials were derived and discussed accordingly.

This lecture closed up the second part of the course!

Lecture 2-3: Dynamics (con't)

We discussed about Newton's second law in terms of kinetic and potential energy, and converted it to Lagrangian form to represent the motion of 1DoF by Euler-Lagrange equations.

We studied holonomic constraints of nDoF system and applied virtual displacement to describe dynamics of nDoF through Euler-Lagrange equations. Kinematics constraints were bought back for calculation of kinetic and potential energy for motion equations.

We enhanced our knowledge about dynamics of industrial manipulators through a number of examples of two-link cartesian manipulator, two-link elbow manipulator, and a planner five-bar. 

Tuesday, 3 November 2026

Assignment 2 has been released!

 Assignment 2 has been released. You can click HERE to find it. 


Remember to submit your assignment via email to Tuan and me by the deadline. 

You should pay attention to the notices in the assignment.

Lab 3 - Review of Inverse kinematics and Velocity Kinematics (Jacobian)

To support the 2nd assignment, we will use our lab time (2:30 - 5:20) to review Inverse Kinematics and Velocity Kinematics. We used examples in the lecture notes to consolidate the key concepts and methods. 

The TA was also available for any questions if you have during the lab time!

Lecture 2-2: Dynamics

Euler-lagrange equation for 1DoF system has been introduced with kinetic and potential energi. Inertia of a rigid body was studied.

Once the base knowledge was set, kinetic and potential energies  of n-link manipulator were derived and calculated. Note that, once we have known dynamics of an n-link manipulator, we calculate and apply appropriate forces to drive the robot to a position of its configuration space.


Tuesday, 27 October 2026

Lecture 2-1: Velocity Kinematics and the Jacobian

We studied how to derive angular velocities and linear velocity of a fixed and arbitrary axes, then found the relation of  end-effector linear and angular velocities with joint velocities.

We introduced the Jacobian to describe instantaneous transformation of joint velocities to the linear and angular velocities of the end-effector. To illustrate the method, we used examples of serial manipulators to learn how to describe the Jacobian of such robots.

Monday, 26 October 2026

Lab 2 - Review of Assignment 1 (Forward Kinematics) and Inverse Kinematics

The first assignment will be released this week, so we will use our lab time (2:30 - 5:20) to review Assignment 1 in the first part, and review the Inverse Kinematics with examples in the lecture notes and derive the inverse kinematics of AL5D robots

1. Review the Forward Kinematics of Serial Manipulators of Assignment 1

2. Find the inverse kinematics of AL5D manipulator

- You should review the lecture notes of Inverse Kinematics (Lecture 1-5) 

- Use knowledge learnt through examples in Lecture 1-5 to derive the inverse kinematics of the AL5D robot. 



Thursday, 8 October 2026

Module 1-5 Inverse Kinematics

We studied inverse kinematics of industrial manipulators. The key difference between the forward and inverse kinematics is that: there is always a unique solution for the forward kinematics while the inverse kinematics may or mayn't have a solution, therefore analytical closed-form solutions are ideal.

In a closed form solution, we solve the inverse kinematics in two parts: inverse position kinematics and inverse orientation kinematics. A number of examples were used to study how to solve the inverse kinematics.

We also studied the numerical method of how to find inverse kinematics of n-link manipulators.

Wednesday, 7 October 2026

Assignment 1 released!

Assignment 1 has been released. You can click HERE to find it. 

Remember to submit your assignment via email to me and Tuan by the deadline). 

You should pay attention to the notices in the assignment.

Tuesday, 6 October 2026

Lab 1: Forward Kinematics

Lab 1 is dedicated to review through the Forward Kinematics:

1. Review through 6 examples of Lecture 1-4 to ensure how to assign coordinates and identify parameters and variables accordingly.

2. Derive the homogeneous transformation matrices of the robot arm AL5D, then examine the DH parameters w.r.t the end-effector. Given a set of robot configuration (a.k.a DH parameters), find and verify the end-effector position and orientation.












Lecture 1-4: More examples of Forward Kinematics

We have studied a couple of examples of forward kinematics to get better understanding about how to use the DH convention to represent a kinematics of chained rigid bodies.


Friday, 2 October 2026

Lecture 1-3 Forward Kinematics

We have learnt how to utilize the homogeneous transformation matrices to represent forward kinematics of serial manipulator. DH convention was introduced and analyzed through examples of serial manipulator.
You should go through slides and look at more examples of how to use DH to describe forward kinematics of different robot kinematics.


Thursday, 24 September 2026

Lecture 1-2 Rigid body motion

We have studied motion of a rigid body in the plane and 3-dimensional space through compositions of translation and rotation matrices.

We studied how to derive and use homogeneous transformation matrices to represent transformation of a rigid body in 2D and 3D space.

We will learn how to use the homogeneous transformation matrices to represent the forward kinematics of a serial manipulator next lectures.

Tuesday, 22 September 2026

Lecture 1-1: Configuration space

We have studies fundamentals of configuration space, work space, task space as well as their mathematical representation.

We learnt how to apply Grubler formula to calculate DoF of a kinematic chain, and understand how to govern the kinematic chain through its configuration including joints and links!


Tuesday, 15 September 2026

Lecture 0-1: General introduction

We have gone through history and application domains of industrial manipulators and mobile robots.

We also studied fundamental concepts of robotics such as rigid bodies, arm, wrist, end-effector, open vs. closed kinematic constraints, mobility, degree of freedoms, workspace, configuration spaces, etc.